Regash wrote:Do you mind telling us, which parts you used?
I can't seem to find any bret knights on foot.
Sure, no problem!
Everything you see there came from a single
Bretonnian Battalion.
The knight parts I used were as follows:
Head - Knight of the Realm heads
Bodies - I used the sergeants from the Men At Arms for these as they were a little better dressed than the standard ones.
Arms - Mixture of KotR and Men-At-Arms arm bits. I had to clip off the weapons. I wasn't as neat as I should have been!
Yeomen:
Heads - Men-At-arm Heads. I specifically chose the ones with the round hats. The bodies were from the MaA sets as well, along with the arms.
Bodies/arms - see above
Peasants:
Heads and Bodies both taken from the peasant archer sets. The poses work pretty well, just swivel the head to be looking forwards and clip off the bow: voila!
The only bit of advice I would give is make sure you have a little amount of green stuff for the knight's heads. They don't sit very happily on the bodies of the Men-At-Arms, so you will have to put a little there to fill the gaps.
Good luck!
I absolutely love those Bretonnians.
