Page 1 of 1

Has anyone experience with magnetic tape?

Posted: Sun Jan 29, 2017 4:03 pm
by nyahoi
A strange question, but I cant think where else to ask this :D

I had a thought of using printable magnetic paper to make my own magnetic skill labels. Then was thinking of wrapping self adhesive magnetic tape to the inside of base rims to hold them in place on the model. Was wondering if the strength of the tape would be enough to pull through the thickness of the base rim though. Has anyone experience with such a thing? I know I could just place the tape on the outside of the base instead, but I think it would look a lot better if it was hidden from view.

Re: Has anyone experience with magnetic tape?

Posted: Sun Jan 29, 2017 4:24 pm
by mikeyc222
i tried that a while back. the magnetic field of the tape that i used wasn't strong enough to adhere through the base. the tape i used was similar in thickness and texture with a refrigerator magnet.

Re: Has anyone experience with magnetic tape?

Posted: Sun Jan 29, 2017 6:45 pm
by nyahoi
mikeyc222 wrote:i tried that a while back. the magnetic field of the tape that i used wasn't strong enough to adhere through the base. the tape i used was similar in thickness and texture with a refrigerator magnet.
That seems thick enough alright. Maybe carving out grooves for the tape as deep as possible to the inside rim might work. Guess I'll have to buy some and try :D.
Another option might be gluing magnets into holes on the sides. Slightly sunk in so I can smooth over the difference with Milliput to hide them. I'd have the same worry of the magnetic field being blocked through the clay, but it'd have a much stronger pull so more than likely would be better.

Re: Has anyone experience with magnetic tape?

Posted: Sun Jan 29, 2017 8:35 pm
by Itchen Masack
Perhaps a couple of small magnets glued on the inside of the base? I can confirm that the following are strong enough to effect things through a base. Cheap too.

http://www.banggood.com/3mm-x-1mm-N35-R ... mds=search

they are also quite addictive to play with too!

Re: Has anyone experience with magnetic tape?

Posted: Sun Jan 29, 2017 8:45 pm
by Wifflebat
I never knew that something like this existed:

Magnetic receptive paint

Anyone ever try anything like it?

Re: Has anyone experience with magnetic tape?

Posted: Sun Jan 29, 2017 9:31 pm
by nyahoi
Itchen Masack wrote:Perhaps a couple of small magnets glued on the inside of the base? I can confirm that the following are strong enough to effect things through a base. Cheap too.

http://www.banggood.com/3mm-x-1mm-N35-R ... mds=search

they are also quite addictive to play with too!

That's good news! Thanks very much.
Have magnets and magnetic paper ordered. I'll update on whether or not it works :)

Re: Has anyone experience with magnetic tape?

Posted: Wed Feb 01, 2017 10:02 pm
by JT-Y
Don't bother with magnetic tape, it's the wrong stuff.

Use steel paper and glue rare earth magnets inside the bases, you get a much stronger attraction between ferrous steel paper and magnets than between mag tape and magnets, the polarities line up better.
Plus steel paper is more suited to printing onto, though if you're using an inkjet you'll want to print on photo settings because steel paper is quite a high satin finish.

This stuff is adhesive backed:
http://www.magneticdisplays.co.uk/magne ... teel-paper

You can find non adhesive easily enough:
http://www.ebay.co.uk/itm/like/32083967 ... 731&crdt=0