just make some.
u can even buy blank dice for like 40 cents.
thats what i did for all my scater dice
Where to get some block dice?
Moderator: TFF Mods
-
khorneskulls
- Veteran
- Posts: 183
- Joined: Mon Dec 09, 2002 5:12 pm
- Location: cambridge MA
- Contact:
-
Taochad
- Rookie
- Posts: 13
- Joined: Fri Oct 25, 2002 2:32 pm
DIY
I made some "quick" bb pitches myself.
I took masonite board (a.k.a. hardboard), taped off a 15" x 26" area, and spray painted that section green. I then laid a peice of pegboard over my new green pitch and spray painted it white. Removing the pegboard left white dots spaced 1" apart, thus dividing my field (much faster than measuring & drawing a TON of little crosses). The lines I painted on white with a brush.
FYI: the "widezones" are 4" wide.
I made the range rulers out of plexiglass and they work great!
DICE:
1= skull
2= skull + "bam"
3,4= arrow
5= bam/exclimation point
6= bam
hope this helps
I took masonite board (a.k.a. hardboard), taped off a 15" x 26" area, and spray painted that section green. I then laid a peice of pegboard over my new green pitch and spray painted it white. Removing the pegboard left white dots spaced 1" apart, thus dividing my field (much faster than measuring & drawing a TON of little crosses). The lines I painted on white with a brush.
FYI: the "widezones" are 4" wide.
I made the range rulers out of plexiglass and they work great!
DICE:
1= skull
2= skull + "bam"
3,4= arrow
5= bam/exclimation point
6= bam
hope this helps
Reason: ''