Underworld/sewer/Skaven pitch WIP & Slann pitch WIP
Moderator: TFF Mods
- the solitaire
- Star Player
- Posts: 530
- Joined: Sun Mar 21, 2010 8:59 am
- Location: germany
Underworld/sewer/Skaven pitch WIP & Slann pitch WIP
With the help of my girlfriend I am now, after finishing my moor pitch and dungeonbowl field, working on a graveyard.
The work started much like on the moor pitch I made, but instead of using sand for the base of the field I used a mixture of sand and shredded leaves and whatnot which I collected in a forest nearby, dried and then glued liberally on the pink foam.
Like the moor field I cut out the dugouts and arranged turn counter and score counter along the sidelines (in this case behind the touchdown zone)
This is what the field looks like at the moment
There is still some work to do. We collected some twigs which will be placed to represent cut down trees. In the center piece of the field we will create a small diorama (the graveyard hill with the small altar holding the Necronomicon as shown in Army of the Dead)
Another idea which found it's way in to the final field can be seen below
I figured luminexcent paint would add a bit of undead character to the field
The work started much like on the moor pitch I made, but instead of using sand for the base of the field I used a mixture of sand and shredded leaves and whatnot which I collected in a forest nearby, dried and then glued liberally on the pink foam.
Like the moor field I cut out the dugouts and arranged turn counter and score counter along the sidelines (in this case behind the touchdown zone)
This is what the field looks like at the moment
There is still some work to do. We collected some twigs which will be placed to represent cut down trees. In the center piece of the field we will create a small diorama (the graveyard hill with the small altar holding the Necronomicon as shown in Army of the Dead)
Another idea which found it's way in to the final field can be seen below
I figured luminexcent paint would add a bit of undead character to the field
Reason: ''
If you can´t fix it with a hammer, you have an electric problem
- Saebelsultan
- Super Star
- Posts: 760
- Joined: Wed May 07, 2014 7:02 am
- Location: Kicking off in stadiums around the Old World
- Contact:
Re: Undead Bloodbowl Pitch (WIP)
Oooh, I see something great coming along!
Reason: ''
"This game is too good not to be played!" - Coach Pauli
Blood Bowl Beginner Kit
Saebelsultan's BB Dugouts
Blood Bowl Beginner Kit
Saebelsultan's BB Dugouts
- Axtklinge
- Legend
- Posts: 1947
- Joined: Fri Apr 16, 2004 2:08 am
- Location: Porto, Portugal
- Contact:
Re: Undead Bloodbowl Pitch (WIP)
Looking forward to see how this evolves.
Great stuff so far!
Cheers,
A.
Great stuff so far!
Cheers,
A.
Reason: ''
- Shteve0
- Legend
- Posts: 2479
- Joined: Thu May 07, 2009 10:15 am
- Location: Wellington, New Zealand
Looks fantastic - keep it up!
Reason: ''
League and tournament hosting, blogging and individual forums - all totally free. For the most immersive tabletop sports community experience around, check out theendzone.co
- the solitaire
- Star Player
- Posts: 530
- Joined: Sun Mar 21, 2010 8:59 am
- Location: germany
Re: Undead Bloodbowl Pitch (WIP)
I just added 2 layers of gloss clearcoat. Tomorrow will see some final detail painted on and then two layers of matte clearcoat.
More pictures will follow after the clearcoat dried.
More pictures will follow after the clearcoat dried.
Reason: ''
If you can´t fix it with a hammer, you have an electric problem
- the solitaire
- Star Player
- Posts: 530
- Joined: Sun Mar 21, 2010 8:59 am
- Location: germany
Re: Undead Bloodbowl Pitch (WIP)
As promised, a few more photos of the now nearly finished gaming board. The design is intended to serve as base structure for a foldable case for easy transport. Still working on th edetails there though.
(focus slightly further to the front)
With the little amount of light the evening provided and a speedlight I tried to make things look somewhat natural. The final pictures of the finished board will be taken with daylight and without flash.
(focus slightly further to the front)
With the little amount of light the evening provided and a speedlight I tried to make things look somewhat natural. The final pictures of the finished board will be taken with daylight and without flash.
Reason: ''
If you can´t fix it with a hammer, you have an electric problem
- Toffer
- Veteran
- Posts: 186
- Joined: Sat Oct 22, 2011 9:27 am
- Location: Blenheim, NZ
- Axtklinge
- Legend
- Posts: 1947
- Joined: Fri Apr 16, 2004 2:08 am
- Location: Porto, Portugal
- Contact:
Re: Undead Bloodbowl Pitch (WIP)
What a great job!
Love all the details.
Bet it must be a joy to play on it!
Cheers,
A.
PS: BTW, the last pic is really cool.
Love all the details.
Bet it must be a joy to play on it!
Cheers,
A.
PS: BTW, the last pic is really cool.
Reason: ''
- the solitaire
- Star Player
- Posts: 530
- Joined: Sun Mar 21, 2010 8:59 am
- Location: germany
Re: Undead Bloodbowl Pitch (WIP)
Axe, not sure yet how playing on the board is. I have not tried that because I have not yet finihsed all the detail stuff.
The miniatures were placed on the board at random
I think it will be a nice board to play on, even if the turn counter/score counter fields might be a bit confusing.
The miniatures were placed on the board at random
I think it will be a nice board to play on, even if the turn counter/score counter fields might be a bit confusing.
Reason: ''
If you can´t fix it with a hammer, you have an electric problem
- Echsenmensch
- Rookie
- Posts: 20
- Joined: Sat May 23, 2015 8:59 pm
- the solitaire
- Star Player
- Posts: 530
- Joined: Sun Mar 21, 2010 8:59 am
- Location: germany
Re: Undead Bloodbowl Pitch (22 photos of the finished pitch)
I must say that it was a lot of fun making this one, and I really enjoyed that my girlfriend helped me a lot as well. At this stage I would like to say it's finished though and move on to the next project
Reason: ''
If you can´t fix it with a hammer, you have an electric problem
- Axtklinge
- Legend
- Posts: 1947
- Joined: Fri Apr 16, 2004 2:08 am
- Location: Porto, Portugal
- Contact:
- the solitaire
- Star Player
- Posts: 530
- Joined: Sun Mar 21, 2010 8:59 am
- Location: germany
Re: Undead Bloodbowl Pitch (Underworld/sewer/Skaven pitch WI
We just started work on a new Bloodbowl pitch
This one with a sewer theme to it. It's a smaller sized board that I could leave on the livingroom table most of the time. Because of the smaller size I had to rearrange a few of the items like the score counter (now only 7 instead of 8 fields), turn counter and the dugouts (3 fields of 3"x3" each)
I wanted to use large amounts of acrylic water on this one so I decided to build a sewer cutout with 2 submerged channels and only the central piece of the field raised.
Another feature, mainly for cosmetic reasons, walls on 3 of 4 sides which allow for many many small details adding to the sewer feeling
The raised sections were glued to the wooden base first and were left to set overnight
Layout of the gaming area and the first detailing on the walls
I am so happy that my girlfriend cuts out and details the walls while I work on other bits and pieces. Still, the both of us already look forward to the day where all the walls and tiles are done, all detail is carved into the styrofoam and we can start painting and adding the really nice details as well as plentyful water effects
This one with a sewer theme to it. It's a smaller sized board that I could leave on the livingroom table most of the time. Because of the smaller size I had to rearrange a few of the items like the score counter (now only 7 instead of 8 fields), turn counter and the dugouts (3 fields of 3"x3" each)
I wanted to use large amounts of acrylic water on this one so I decided to build a sewer cutout with 2 submerged channels and only the central piece of the field raised.
Another feature, mainly for cosmetic reasons, walls on 3 of 4 sides which allow for many many small details adding to the sewer feeling
The raised sections were glued to the wooden base first and were left to set overnight
Layout of the gaming area and the first detailing on the walls
I am so happy that my girlfriend cuts out and details the walls while I work on other bits and pieces. Still, the both of us already look forward to the day where all the walls and tiles are done, all detail is carved into the styrofoam and we can start painting and adding the really nice details as well as plentyful water effects
Reason: ''
If you can´t fix it with a hammer, you have an electric problem
- the solitaire
- Star Player
- Posts: 530
- Joined: Sun Mar 21, 2010 8:59 am
- Location: germany
Re: Undead Bloodbowl Pitch (Underworld/sewer/Skaven pitch WI
Here is another side project we are working on
A little cabin in the woods. We have some work done on the trees but most of the trees are still early WIP and desperately need leaves
Where there is a bridge, there is a body of water. We want to add a small creek, which means more need for water effects
When the board is done it will be full of trees. Not just 2 or three but something that really resembles dense forest.
A little cabin in the woods. We have some work done on the trees but most of the trees are still early WIP and desperately need leaves
Where there is a bridge, there is a body of water. We want to add a small creek, which means more need for water effects
When the board is done it will be full of trees. Not just 2 or three but something that really resembles dense forest.
Reason: ''
If you can´t fix it with a hammer, you have an electric problem
- the solitaire
- Star Player
- Posts: 530
- Joined: Sun Mar 21, 2010 8:59 am
- Location: germany
Re: Undead Bloodbowl Pitch (Underworld/sewer/Skaven pitch WI
Progress is slow but it's there
We cut up some cardboard (Pringles) cans and glued selitac to both sides, then started drawing and cutting out the stonework on them.
This is boring tedious work, even when done by two people
We cut up some cardboard (Pringles) cans and glued selitac to both sides, then started drawing and cutting out the stonework on them.
This is boring tedious work, even when done by two people
Reason: ''
If you can´t fix it with a hammer, you have an electric problem